Audio Technica AT3032
Audio Technica AT3032 Description:
The low-profile AT3032 omnidirectional condenser recording mic is outstanding for piano, acoustic guitar, and other acoustic instruments. Known for its flat, extended frequency response and wide dynamic range, the AT3032 handles high SPLs with ease. Its low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer. Its low self-noise (16 dB SPL) is perfectly suited for the most sophisticated recording equipment.
Low self-noise, perfectly suited for the most sensitive digital recording equipment. Flat, extended frequency response. Lo-cut switch and 10dB pad.
Audio Technica AT3032 Features:
- True condenser element
- High SPL handling
- Low self-noise
- Flat, extended frequency response
- Lo-cut switch and 10dB pad
Audio Technica AT3032 Specifications:
- ELEMENT Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN Omnidirectional
- FREQUENCY RESPONSE 30-20,000 Hz
- LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY -34 dB (19.9 mV) re 1V at 1 Pa
- IMPEDANCE 250 ohms
- MAXIMUM INPUT SOUND LEVEL 148 dB SPL, 1 kHz at 1% T.H.D.;
- 158 dB SPL, with 10 dB pad (nominal)
- NOISE 16 dB SPL
- DYNAMIC RANGE (typical) 132 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 78 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical
- SWITCHES Flat, roll-off;
- 10 dB pad (nominal)
- WEIGHT 4.1 oz (116 g)
- DIMENSIONS 5.67" (144.0 mm) long,
- 0.83" (21.0 mm) maximum body diameter
- OUTPUT CONNECTOR Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; soft protective pouch
- AUDIO-TECHNICA CASE STYLE S1
Get your Audio Technica AT3032 today!
