Audio Technica AT4041

Audio Technica AT4041 Description:

This premium electret condenser microphone is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.

Audio Technica AT4041 Features:

• Smooth, extended frequency response with a slight rise occurring in the high-frequency region
• Ideal for drum overheads, acoustic guitar, piano, horns and under snare
• Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
• Switchable hi-pass filter and rugged turned-brass microphone housing
• Custom shock mount provides superior isolation

Audio Technica AT4041 Specifications:

• ELEMENT Fixed-charge back plate, permanently polarized condenser
• POLAR PATTERN Cardioid
• FREQUENCY RESPONSE 20-20,000 Hz
• LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
• OPEN CIRCUIT SENSITIVITY -36 dB (15.8 mV), re 1V at 1 Pa
• IMPEDANCE 100 ohms
• MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.
• DYNAMIC RANGE (typical) 121 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS 48V DC, 3.2 mA typical
• SWITCH Flat, roll-off
• WEIGHT 4.2 oz (120 g)
• DIMENSIONS 6.28" (159.5 mm) long,
• 0.83" (21.0 mm) body diameter
• OUTPUT CONNECTOR Integral 3-pin XLRM-type
• ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying
• case
• AUDIO-TECHNICA CASE STYLE S1

Get your Audio Technica AT4041 today!

Accu Cable Akai AKG Alesis Alvarez American Audio American DJ Ampeg Anchor Audio Antari Applause Aria Artley Arturia Audio Technica Auralex Axis AXL B.C. Rich Bach Bornemark Boss Breedlove Casio Celemony Celestion Cerwin Vega Chauvet Conn Crate Crown D'Aquisto Daisy Rock DBX Dean Denon Digidesign Digitech DW EAW Eden Edirol Elation Electro Harmonix Electro Voice Emerson EMG ESP Event Fender Acoustics Fender Amplifiers Fender Audio Fender Basses Fender Custom Shop Fender Guitars Focusrite Fostex Furman Gallien Krueger Gator Gemini Genz Benz Gibraltar Gig Skinz Gon Bops Hammond Hartke HHB Hiwatt Holton Hosa Hughes And Kettner Ibanez Icons of Rock ImageLine Jasmine Jay Turser JBL Johnson Ketron Korg KRK Latin Percussion LeBlanc Lexicon Line 6 Loar Ludwig Luna Guitars M-Audio Mackie Marshall Martin Martin Band Microboards Milab Mindprint Monster Montana Moog Motu MusicXPC Musser MXL Nady Nord Notion Numark Odyssey Ortofon Oscar Schmidt Ovation Pacific Paiste Palatino Paris Swing Parker Pearl Pearl Percussion Peavey Pioneer Presonus Propellerhead Prosoniq QSC Randall Rane Recording King Road Ready Roland Rosendahl Sabian Samick Samson Schecter Selmer Sennheiser Seymour Duncan Shure Silvertone Soundcraft Squier Stanton Steinberg Takamine Tama Tannoy Tapco Tascam Taylor The Loar Toca Vestax Virsyn Vito Vocopro Vox Washburn Yairi Yamaha Drums Yamaha Guitars Yamaha Keyboards Yanagisawa Zildjian Zoom