Crown 14M
Crown 14M Description:
The 14M, part of the Commercial Audio Series from Crown Audio, is a rack-mountable preamplifier/mixer ideal for use in factories, schools, hospitals, restaurants, offices, and other venues. It features four mic/line inputs with stereo RCA jacks and balanced phoenix-type connectors and a single output with a balanced phoenix-type connector. Priority muting is included for paging.
Individual volume, bass, and treble controls are provided for each input. LED signal indicators are provided for each input and the output. A built-in tone generator provides bell, pre-announce chime, alert, and evacuate tones.
Crown 14M Features:
- Four input channels, each with stereo RCA jacks and balanced phoenix-type connectors
- One output channel with a balanced phoenix-type connector
- Priority muting for paging
- Built-in four tone generator
- Signal indicator LEDs
- Level, bass, and treble controls for each input
- Phantom power
Crown 14M Specifications:
- Frequency Response 20Hz - 20kHz
- Signal to Noise Ratio 100 dB
- Total Harmonic Distortion (THD) 0.05% (Typical)
- Input Sensitivity Balanced Mic: 3mV
Balanced Line: 800mV
RCA: 400mV
- Input Impedance Mic: 400 ohms
Line: 100 k ohms
RCA: 50 k ohms
- Crosstalk -50 dB
- Output Level 1.2V
- Phantom Power 15VDC
- Controls Front Panel 1 x Power Switch
4 x Input Volume Control Knobs
4 x Bass Controls
4 x Treble Controls
1 x Output Volume Control Knob
- Controls Rear Panel 1 x Mixer Config. DIP Switch (For Priority Muting and Phantom Power)
4 x Mic/Line Selector Switches
1 x Output Tone Control Potentiometer
- Indicators Green LEDs for Input and Output Signals on Front Panel
Red Clip Indicator LED
Blue Power Indicator LED
- Connectors 1 x AC Power Inlet
1 x 2-Position Terminal Strip (24VDC Backup Power)
1 x 3-Pin Phoenix Connector for Priority Muting
1 x 3-Pin Balanced Phoenix Output Connector
1 x 5-Pin Phoenix Connector for Tone Generator
4 x Balanced 3-Pin Phoenix Input Connectors
4 x RCA Stereo Input Pairs (8 Jacks Total)
- Dimensions (WxHxD) 19 x 1.75 x 10.7" (483 x 45 x 272mm)
- Weight 8.7 lbs (3.9 kg)
Get your Crown 14M today!
