Crown 180MAxPACK

Crown 180MAxPACK Description:

The 180MAx is the first integrated tuner mixer-amplifier designed for commercial use. Applications include restaurants, retail stores, coffee shops and other commercial establishments.

The system includes the Crown 180MAx tuner-mixer-amplifier, four JBL© Control© 1ST 2-way miniature loudspeakers with built-in 25V/70V transformers, XM antenna, and a wireless remote control.

Built into the 180MAx is an XM Radio tuner that receives satellite radio stations with digital sound quality. A front-panel LCD screen displays XM Radio channel data (channel number, channel name, artist name, song title), 16 station presets and signal strength.

The unit also accepts signals from line, telephone, or microphone (phantom power included). Bass and treble controls allow the user to tailor the tone quality of the sound system. The priority ducking feature drops the volume of the background music when a microphone is used. A VOX sensitivity setting controls how loud the voice must be before ducking occurs. Units can be linked to increase the number of input and output channels.

The built-in power amplifier provides 80 watts into 4 ohms, 25V and 70V for use with the JBL Control 1ST loudspeakers. Current and thermal limiting protect the amplifier and loudpeakers from accidental overload.

Crown 180MAxPACK Features:

• Ideal for commercial and industrial use
• 4 inputs (each with a volume control) and one 80W amplifier output channel
• Independent bass and treble controls for each input
• Balanced Phoenix-type mic/line inputs; touch-proof screw-terminal speaker outputs
• Programmable XM tuner with XM channel data display
• Priority ducking
• Music-On-Hold outputs
• Four JBL Control 1ST 2-way miniature speakers with transformer and mounting brackets included
• Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Crown 180MAxPACK Specifications:

• 180 MAx Amp
• Frequency Reponse (at 1 watt from 4-ohm tap):
• 70Hz to 19kHz ±1dB.
• Frequency Response (at line out): 20Hz to 20kHz ±1dB
• Power Bandwidth (at 4-ohm tap, 2dB below
• maxium 1 kHz power): 50Hz to 20kHz with < 0.5% THD
• Signal to Noise Ratio (ref. to rated power, master volume at minimum): 85dB
• DC Output Offset: < ±5 mV
• THD: Less than 0.5% at rated power at 1 kHz.
• Input Sensitivity (for full output at maximum gain):
• Balanced mic inputs: 3mV
• Balanced line inputs: 800mV
• RCA connectors: 400mV
• Isolated telephone input: 75 mV
• Input Impedance (nominal):
• Mic: 400 ohms
• Line: 100 kilohms
• RCA: 50 kilohms
• Telephone: 600 ohms
• Crosstalk: 70dB at 1kHz
• Line Output Level (nominal): 1V into 10 kilohms
• Phantom Power: 15 VDC
• AC Line Voltages Available: 120V, 60 Hz. Line voltage tolerance +10%, 20%
• Operating Temperature/Humidity: 0ø C to 40ø C at 95% relative humidity (non-condensing).
• Storage Temperature: 20ø C to 85ø C.
• Front Panel Controls and Indicators
• Power Switch: Pushbutton on-off switch
• Input Volume Controls: Four detented potentiometers with knobs
• Input 1: Microphone/line (switchable)/telephone
• Inputs 2 and 3: Line
• Input 4: XM radio
• Tone Controls: Bass and Treble non-detented recessed potentiometers on each input channel
• Bass ±10dB at 100Hz, Treble ±10dB at 10kHz
• XM Tuner Menu Button: Selects Direct, Preset, or Category mode.
• XM Tuner Category Buttons: Scrolls through categories (rock, classical, news, country, etc)
• XM Tuner Scroll Knob: Lets you scroll through channels and select them.
• XM Tuner Display: LCD screen displays XM channel data (channel number, channel name, artist name, song title), 16 station presets and signal strength
• Power Indicator: Blue LED indicates power on
• Input Signal Presence Indicator: Green LED illuminates when input signal exceeds 24 dBu (line) or 70 dBu (mic)
• Output Signal Presence Indicator: Green LED, illuminates when output signal level exceeds 100mV (45dB below full power) from the 4-ohm tap
• Clip Indicator: Red LED on output illuminates at threshold of audible distortion
• Output Volume Control: Detented potentiometer with knob
• Back Panel Controls, Connectors and Indicators
• Reset Switch: Resets the circuit breaker that protects the power supply
• MOH 1V Level Control: Trim pot adjusts level for Music-On-Hold 1V output
• MOH 1W Level Control: Trim pot adjusts level for Music-On-hold 1W output
• MOH Signal Presence Indicator: Flashes when MOH signal is present
• MOH Source Switch: Switches between Input 3 or XM, and routes the source to MOH 1V Line Out and MOH 1W connectors
• MOH 1W Select Switch: Feeds 1W MOH signal either to amplifier output or internal speaker
• MOH 1V Line Output RCA Connectors: Two RCA connectors (mono) for 1-volt output (in parallel with 600-ohm connectors, so they are isolated)
• MOH 1W Line Output Connector: 3-pin Phoenix connector provides Music-On-Hold signal of approximately 1 watt
• 1 kHz
• Power
• 80W
• Minimum guaranteed power
• into 4 ohms or 25V/70V output
• 180MAx
• *1 kHz Power: refers to maximum power in watts at
• 1 kHz with 0.5% THD.
• MOH 1V Line Output Phoenix Connector: 3-pin Phoenix connector, 600-ohm transformer-isolated output, provides music-on-hold signal of approximately 1 volt.
• Phantom Power Switch: Turns phantom power on or off for Input 1
• Mic/line Switch: Selects mic-level or line-level signal for Input 1
• Link In/Out Switch: Slide switch. When set to IN, any signal applied to the Amp Input connector will be mixed with the input signal(s); when set to OUT, only the signal from the Amp Input Connector will appear at the amplifier output.
• Amplifier Output Connectors: 4-position terminal strip with COM (Common), 4 ohms, 25V and 70V terminals. Accepts up to 10 AWG crimp-on terminal forks Non-touch cover included
• XM Radio Stereo Line Out Connector: Dual RCA jacks for stereo music out from XM Radio tuner
• Preamp Line Out Connector: 3-pin balanced
• Phoenix-type connector: Post master, pre-VCA
• Level controlled by master volume control
• Output VCA Connector: 3-pin Phoenix-type connector for two VCA control lines of +10 VDC and ground
• Compatible with Crown 1-VCAP module
• Priority Connector: 3-pin Phoenix-type connector for push-to-talk mic switch. Contact closure activates ducking. Ducking does not affect Music-
• On-Hold outputs or XM stereo line out
• Active Indicator: LED illuminates when VOX ducking is active
• VOX Threshold: Trim pot adjusts how loud the voice must be before ducking occurs
• Can be set for no ducking
• Priority Release Control: Trim pot adjusts release time of VOX ducking
• Mic/Line Input Connector (Input 1 only): 3-pin
• Phoenix-type, balanced.
• Line Input Connectors (Inputs 2 and 3 only): 3-pin Phoenix-type, balanced
• Dual RCA Input Connector: For stereo music signals, unbalanced, summed together, two connectors per input for inputs 1, 2 and 3
• TEL Input Connector: Transformer-isolated 600-ohm input, summed into Input 1 for paging from a telephone system
• Amp Input Connector: 3-pin Phoenix-type, high-impedance balanced. Used to link an additional mixer to the mixer-amplifier. Can be used to connect an external processor.
• AC Power Inlet: Detachable IEC.
• XM Radio Antenna Input: Connects to the XM antenna cable.
• Cooling
• Convection cooled
• Protection
• Current Limit Protection: Included
• Thermal Limit Protection: Over-temperature
• thermal cutout
• DC-Fault Load Protection: Included
• Included Accessories
• Power cord
• Detachable rack ears
• Screws for rack ears
• Non-touch cover for output connectors
• Phoenix-type connectors
• Spade lugs
• XM antenna
• Remote control
• Crown offers a Three-Year, no-fault, fully transferable warranty for every new Crown tuner-mixer-amplifier
• Optional Accessories
• 1-VCAP remote volume control
• Dimensions:
• Width (without rack ears): 17.3 in. (43.8 cm).
• Width (with rack ears): EIA Standard 19 in. W (EIA RS-310-B).
• Height (front panel): 3.5 in. (8.9 cm).
• Height (including feet): 4.1 in. (10.5 cm).
• Depth (front panel to back panel): 12.2 (31.0 cm).
• Depth (front of knobs to back of non-touch cover): 13.9 in.
• Net Weight: 20 lb (9.07 kg).
• JBL Control 1 ST loudspeaker specs:
• Frequency Response: 80 Hz - 20 kHz. Recommended Power Range: 10 - 80W continuous average power. Sensitivity: 89dB/1W/1m. Crossover Frequency: 4 kHz. Low-Frequency Driver: 4 in. (100 mm), shielded. High-Frequency Driver: 0.5 in. (12 mm), titanium-laminate, shielded. 70V Tap: 20W.
• Dimensions (HxWxD): 9 in. x 6-1/6 in. x 5-7/16 in. (228 mm x 155 mm x 139 mm).
• Net Weight (each): 6.1 lb (2.8 kg)

Get yourCrown 180MAxPACK today!

Accu Cable Akai AKG Alesis Alvarez American Audio American DJ Ampeg Anchor Audio Antari Applause Aria Armstrong Artley Arturia Audio Technica Auralex Avanti Axis AXL B.C. Rich Bach Bornemark Boss Breedlove Casio Celemony Celestion Cerwin Vega Chauvet Conn Crate Crown D'Aquisto Daisy Rock DBX Dean Denon Digidesign Digitech DW EAW Eden Edirol Elation Electro Harmonix Electro Voice Emerson EMG ESP Event Fender Acoustics Fender Amplifiers Fender Audio Fender Basses Fender Custom Shop Fender Guitars Focusrite Fostex Furman Gallien Krueger Gator Gemini Genz Benz Gewa Gibraltar Gig Skinz Gon Bops Hammond Hartke HHB Hiwatt Holton Hosa Hughes And Kettner Ibanez Icons of Rock ImageLine Jasmine Jay Turser JBL Johnson Ketron King Korg KRK Latin Percussion LeBlanc Lexicon Line 6 Loar Ludwig Luna Guitars M-Audio Mackie Marshall Martin Martin Band Microboards Milab Mindprint Monster Montana Moog Motu MusicXPC Musser MXL Nady Nord Notion Numark Odyssey Ortofon Oscar Schmidt Ovation Pacific Paiste Palatino Paris Swing Parker Pearl Pearl Percussion Peavey Pioneer Presonus Propellerhead Prosoniq QSC Randall Rane Recording King Road Ready Roland Rosendahl Sabian Samick Samson Savannah Schecter Selmer Sennheiser Seymour Duncan Shure Silvertone Soundcraft Squier Stanton Steinberg Takamine Tama Tannoy Tapco Tascam Taylor The Loar Toca Vestax Virsyn Vito Vocopro Vox Washburn Yairi Yamaha Arranger Workstation Yamaha Digital Pianos Yamaha Drums Yamaha Guitars Yamaha Keyboards Yamaha Live Sound Yamaha Music Production Yamaha Portable Keyboards Yanagisawa Zildjian Zoom