Denon DN-X500
Denon DN-X500 Description:
Denon's DN-X500 is a 4U rackmountable mobile/club DJ analog matrix mixer with rock-solid construction and superb audio fidelity. The DN-X500's 8 line and 2 phono inputs are assignable to any of 4 channels. This 8-channel input matrix routing gives you the freedom to move any source to any channel or even the same source to multiple channels for remixing. The DN-X500 features 4 smooth 60mm VCA channel faders for level control and a responsive 45mm VCA crossfader with contour adjustment. Independent pre-fader level meters allow you to optimize and match levels for each source, so you can be sure the transition crossfading between sources is smooth.
The DN-X500 also features 3-band EQ with full output kill, booth output with channel select, 2 mic inputs with talkover sensitivity and effects send/return with cue, dry/wet knob, and channel select. Plus, with the optional ACD-46 rotary fader kit, you can easily swap out any channel fader (1-4).
Denon DN-X500 Features:
Matrix input assignment: 8 input sources are freely assignable to any channel or even multiple channels
8 line/2 phono switchable
4 smooth 60mm VCA channel faders
Responsive 45mm VCA crossfader with contour adjust
Independent channel PFL meters: all input levels can be pre-adjusted in advance to match the gain levels, insuring a smooth transition between fades
Independent 3-band EQ kill (High-Mid-Low)
Independent EQ on/off switch
Booth output assign selector: pre-monitor any channel including Master through the booth
output as you would with your headphones, with volume control
External send/return control: multichannel assignable, effect on/off, effect cueing (pre & post), effect dry/wet knob
Independent channel A-B post switch (crossfader)
Powerful clean headphone output
Fader start (5V pulse): crossfader and channel fader-start trigger is compatible with
all Denon DJ CD/MP3 players
Compact 4U rackspace with recessed rear terminals
Independent 3-band main and aux mic EQ
Independent CUE system (all channels)
Mic talkover function with sensitivity adjustment
Split/cue headphone monitor with PFL metering
Master output -10dB attenuation switch
Master output stereo/mono switch
Record out - RCA/unbalanced
Subwoofer/lighting output with freq. adjust: ideal for powered speakers, powered amp, or even a signal feed for lighting systems
Denon DN-X500 Specifications:
- General Dimensions: 19"W x 4-2/5"H x 6-9/10"D (482 x 112.5 x 177mm)
- Weight: 5.8kg, 13 lbs.
- Power supply: AC120 V ±10%, 60 Hz
- Power consumption: 27W
- Audio Section
- Input Level and Impedance:
- 8-Line-14dBV (200 mV) 50kOhms
- 2-Phono -50dBV (3.0mV) 50kOhms
- Effect (Return) -14dBV (200mV) 50kOhm
- Main Mic -54dBV (2.0mV) 10kOhms
- Aux Mic -60dBV (1.0mV) 10kOhms
- Output Level and Impedance:
- Balanced 4dBm (1.23V) 600 ohms
- Unbalanced 0dBV (1.0V) 1k ohm
- Booth (Balanced) 4dBm (1.23V) 600-ohm load
- Rec (RCA) -10dBV (316mV) 1k Ohm
- Effect (Send) -14dBV (200mV) 1k Ohm
- Subwoofer/Lighting 2dBm (975mV) 600 ohms
- Headphone 0dBV (1.0V) 32 ohms
- Frequency Response:
- Line 20 to 20kHz ±2dB
- Phono 20 to 20kHz RIAA ±2dB
- Mic 20 to 20kHz ±2dB
- Signal to Noise Ratio:
- Line 82dB (0dBm, 1kHz, EQ flat)
- Phono 75dB (0dBm, 1kHz, EQ flat)
- Main Mic 65dB (0dBm, 1kHz, EQ flat)
- Total Harmonic Distortion Rate
- Line Below 0.05%
- Phono Below 0.05%
- Crosstalk Over 70dB
- Channel Equalizer
- Hi +10dB, -35dB (16kHz)
- Mid +10dB, -35dB (1kHz)
- Low +6dB, -35dB (60Hz)
- Microphone Equalizer
- Hi +12dB, -12dB (10kHz)
- Mid +12dB, -12dB (1kHz)
- Low +12dB, -12dB (100Hz)
Get your Denon DN-X500 product Today!
