This product has been discontinued. Please contact our sales department for help in selecting a similar replacement.
EAW SB1002 Black Touring Array System
Subwoofers EAW SB - this excellent equipment designed for the most demanding professional applications.
The wide range of capabilities and provides a choice of size, which is required to meet the requirements of specific applications. Fine emitters designed EAW, with the highest radiated power and the best acoustics for these design parameters. All models SB - devices that direct radiation to optimally configured with a curved shells. Subwoofers SB ideal when absolutely necessary best acoustics, the highest reliability and the most solid physical design.
Model SB1002 - sabvufernaya system is a large format with a high low power, which can be installed or suspend using the integrated system installation that allows the use of this system in various concert shooting systems and permanent installations. Two 18 - inch radiator with a conical diffuser provide flat sounding, construction installation emitters maximizes the area of the diffuser and minimize the front zone acoustics. That is why the acoustic characteristics and the physical configuration of the system most suited to the creation of large sabvufernyh arrays. Used emitters are specifically designed for system SB1002, they have a very large (4.5 - inch) coil sound, as well as powerful neodymium magnetic systems to reduce total weight.
SB1002 model is designed for use digital signal processing to allow optimizing specifications for the low frequency sound. To ensure the right boundary of the sound frequencies and are encouraged to use processors EAW UX and MX series.
System installation, used in such popular series of linear arrays KF760, provides quick and easy to use dvuhtochechnoe consolidation, which allows podveshivaemyh in arrays of up to 12 modules SB1002. The handle on the rear edge of the upper shell SB1002 provides additional administration and the possibility of "Operation pull - Tolkai" in the process of suspension modules.
Data subwoofer can be used in big clubs with live music and dance, religious institutions, in the Performing Arts Center, at corporate events and concert tours.
Subwoofer with two 18 - inch emitters
Specifications:
Subsystem
SUB Load Converter
Two 18 - inch cone with a cone Fazoinvertor
Operating hours
Channels amplifier
The external signal
One amplifier LF1/LF2
DSP with 1 - band filter
Two amplifier LF1, LF2
DSP with 1 - band filter
Performance characteristics
Repeatable frequency range 28 Hz - 160 Hz
Nominal width radiation
Yaw: 360°
Vertical: 360°
Axle sensitivity (SPL)
LF1/LF2 (all space) 95 dB 28 Hz - 160 Hz
(half) 101 dB 28 Hz - 160 Hz
Full input resistance (ohms)
Nominal Minimum
LF1/LF2 4
3.8 to 30 Hz
LF1, LF2
8 (each) 7.5 to 30 Hz (each)
Filter upper frequency 30 Hz, 12 dB at octave
The accelerated durability test
System V LF1/LF2 98
2400 W at 4 ohms
LF1 system, LF2
In 98 (each) 1200 Watts into 8 ohms (each)
Reformer (AES)
1200 W (each)
Estimated limit axial radiated power (SPL for the whole space)
Average
Pique
LF1/LF2 (all space)
129 dB
135 dB
(half)
135 dB
141 dB
0023835: Black
Get Your EAW SB1002 Black Touring Array System Today!