This product has been discontinued. Please contact our sales department for help in selecting a similar replacement.

Edirol M-10DX

Edirol M-10DX Overview:

Portable 24-bit/96kHz DIGITAL Mixer with Built-in Spectrum Analyzer

More portable and affordable than its M-16DX big brother, the M-10DX packs an amazing amount of high-end features into its small frame, including a 24-bit/96kHz processing engine and a backlit LCD so you can see the graphic representation of level meters, EQ, effects and even a spectrum analyzer.

Edirol M-10DX Features:

• 10-channel full digital mixer with M-16DX flagship features
• 3-band EQ controls (Q & Freq.) with graphic LCD for precise tone shaping
• Portable, all-in-one design
• "Room Acoustic Control" for instant automatic room compensation two TRS 1/4" output jacks
• Built-in pro-quality Effects, including COSM insert effects, reverb effects, and finalize effects
• Flexible analog I/O and digital output, including two high-quality mic preamps
• AC adaptor included

Edirol M-10DX Details:

Advanced Specs

Based on the same high-resolution processing engine as the flagship M-16DX, the M-10DX provides full 24-bit/96kHz processing for the ultimate in transparent digital mixing. Mixing is made simple, with dedicated channel controls for 3-Band EQ, Pan, Aux, Select, and Level.

Visual Mix Magic

For maximum portability, the M-10DX condenses almost all of the M-16DXs functions into a compact tabletop package for easy portability and use anywhere. It even retains the backlit LCD from its big brother, so you can see the level meters, EQ, and effects in operation as well as a graphical spectrum analysis

Edirol M-10DX Specifications:

• Number of Input Channels 10 channels
• AD/DA Conversion 96.0 kHz: 20 Hz to 40 kHz (+3/-3 dB), 48.0 kHz: 20 Hz to 22 kHz (+3/-3 dB), 44.1 kHz: 20 Hz to 20 kHz (+3/-3 dB)
• Residual Noise Level (IHF-A, typ.) MAIN MIX LEVEL knob = -, Channel LEVEL knobs = -, MAIN MIX LEVEL knob = U, Channel LEVEL knobs = -: -88 dBu, MAIN MIX LEVEL knob = U, Channel LEVEL knobs = U: -82 dBu
• Nominal Input Level MIC connectors 1C2: -60 to -10 dBu, LINE IN jacks 1C2: -40 to +10 dBu, * Maximum input level: Nominal input level + 22 dB, LINE IN jacks 3C10: +0 dBu, LINE IN jacks 9C10 (RCA pin type): -10 dBu, * Maximum input level: Nominal input level + 18 dB
• Input Impedance MIC connectors 1C2: 2.7 k ohm, LINE IN jacks 1C2: 28 k, LINE IN jacks 3C8: 20 k, LINE IN jacks 9C10 (RCA pin type): 20 k
• Nominal Output Level +0 dBu, * Maximum output level: Nominal Output Level + 22 dB
• Recommended Load Impedance 10 k or greater
• Display Graphic LCD 122 x 32 dot (with back-light)
• Connectors MIC connectors 1C2: XLR type (balanced / phantom power +48 V), LINE IN jacks 1C10: 1/4 inch TRS phone type (balanced), * LINE IN jack 1: supports use of hi-impedance, LINE IN jacks 9C10: RCA pin type, MAIN OUT jacks LCR: 1/4 inch TRS phone type (impedance balanced), AUX SEND jack: 1/4 inch TRS phone type (impedance balanced), 2 TRACK OUT jacks LCR: RCA pin type, DIGITAL OUTPUT jack/connector: Optical type, Coaxial type, PHONES jack: Stereo 1/4 inch phone type, CTRL ROOM jacks LCR: 1/4 inch phone type (impedance balanced)
• DSP processing Room Acoustic Control (built-in microphone), Finalize: Enhancer/Multi-band Compressor-Limiter, Insertion effects: Power compressor/Vocal enhancer/Narration enhancer, Echo/Reverb: Short echo/Echo/Room reverb/Small hall reverb/Large hall reverb
• Power Supply DC 9 V (AC adaptor), Alkaline dry battery LR6 (AA) type x 8 or Nickel metal-hydride battery (HR15/51) x 8
• Current Draw 950 mA, * Expected battery life under continuous use: Nickel metal-hydride: 3 hours, Alkaline: 1.5C2 hours, These figures will vary depending on the actual conditions of use.
• Phantom Power +48 V/5 mA (each input)
• Accessories Owners manual, AC adaptor
• Size and Weight
• Width 199 mm 7-7/8 inches
• Depth 262 mm 10-3/8 inches
• Height 61 mm 2-7/16 inches
• Weight 1.3 kg 2 lbs. 14 oz.
• *The specifications are subject to change without notice.

Get your Edirol M-10DX today