Edirol M-10MX
Edirol M-10MX Overview:
10-Channel Battery-Powered Mixer
The Go-Anywhere Mix Companion
Almost small enough to put in your pocket, this handy mixer is built to EDIROL's high standards, and it's ready to travel. With a choice of 1/4" and RCA inputs and outputs, the M-10MX lets you mix wherever you go.
Edirol M-10MX Features:
- Compact and portable, perfect for mobile/field use
- Wide range of analog inputs and outputs, including two TRS 1/4" output jacks
- 24-bit/96kHz S/PDIF coaxial and optical outputs
- Battery or AC power (AC adaptor included)
Edirol M-10MX Details:
Compact and Portable
AC or battery power, take your choice. The M-10MX comes with an AC adaptor, but it can also operate on battery power (four AA batteries). Thanks to its compact body and battery operation, the M-10MX is an excellent tool for location video and/or field recording, live mixing, and even podcasting with the EDIROL R-09.
Versatility
Connect a wide range of audio devices to the M-10MX, including dynamic microphones, musical instruments, consumer audio devices, video equipment, and audio interfaces for computer audio. The M-10MX's versatile back panel offers 1/4" and RCA input and output ports, plus a dedicated plug-in powered, stereo electret condenser microphone jack, suitable for use with mics such as the EDIROL CS-15. For outputs, two TRS impedance balanced 1/4" phone jacks are provided.
Digital Outputs
The M-10MX is equipped with both coaxial and optical S/PDIF 24-bit/96kHz digital audio outputs, which means you can connect it directly to the S/PDIF digital input of any audio interface, such as the EDIROL UA or FA-series units for recording and mixing entirely in the digital domain. The M-10MX can also be connected digitally to studio monitors such as the EDIROL MA-series or Roland DS-series powered monitors.
Edirol M-10MX Specifications:
- Number of Channels
- 10 in 2 out
- AD Conversion
- Sample Rate 44.1/48.0/96.0 kHz
- Signal Processing 24 bits
- Frequency Response
- 96.0 kHz 20 Hz to 40 kHz (+1/-2 dB)
- 48.0 kHz 20 Hz to 22 kHz (+1/-2 dB)
- 44.1 kHz 20 Hz to 20 kHz (+1/-2 dB)
- Residual Noise Level
- -86 dBu (IHF-A, typ.)
- Nominal Input Level
- Input Jacks 1–6 -50 to +4 dBu
- Input Jacks 1–2 -40 to +10 dBu
- Input Jacks 5–10 -2 dBu
- * Maximum input level: Nominal input level + 12 dB
- Nominal Output Level
- -2 dBu
- * Maximum output level: +10 dBu
- Connectors
- Input Jacks 1–6 1/4 inch phone type, unbalanced
- Input Jacks 1–2 Stereo miniature type, plug-in powered)
- Input Jacks 5–10 RCA pin type
- Main Output Jacks L, R 1/4 inch TRS phone type (impedance balanced),
- RCA pin type
- Digital Output Connectors Optical type, Coaxial type
- Headphone Jack Stereo miniature type
- DC IN (AC adaptor) Jack
- Power Supply
- DC 9 V (AC adaptor), Alkaline dry battery LR6 (AA) type x 4
- Current Draw
- 250 mA
- * Expected battery life under continuous use:
- Alkaline: 6 hours (Power save mode: On), 4 hours (Power save mode: Off)
- These figures will vary depending on the actual conditions of use.
- Dimensions
- 181.2 (W) x 107.5 (D) x 54.0 (H) mm
- 7-3/16 (W) x 4-1/4 (D) x 2-1/8 (H) inches
- Weight
- 393 g / 14 oz
- Accessories
- Owner's Manual, AC Adaptor, Ferrite Core
- *The specifications are subject to change without notice.
Get your Edirol M-10MX today
