JBL JRX112M 12" Two-Way Portable Stage Monitor
Designed from the ground up as a stage monitor, the JRX112M is a 12 two-way stage monitor in a compact enclosure also featuring the dual-angle pole socket for front-of-house applications. Voiced to perfection, the JRX112M cuts through to allow performers to hear everything they need for a professional performance.
A sophisticated, advanced network topology design is utilized in JRX100 models to ensure quality performance. To minimize distortion due to coil saturation, heavy gauge wire is used for inductors and SonicGuard™ high-frequency driver protection guards against damage caused by inadvertent overpowering of the system. All full-range models feature Neutrik® Speakon® and ¼" input connectors.
All JRX100 series models are constructed of carpet-covered, 3/4" MDF - a material that is structurally and acoustically superior to the particleboard that is used by many competitive products. To ensure durability, JBL constructs these enclosures with advanced adhesives and closely mechanically spaced fasteners, while competitive systems typically rely on glue. Non-resonant, all metal handles are used and an 18 gauge, full metal grille protects the drivers. All JRX100 models have passed the same 100-hour, full rated-power torture test that JBL high-end touring systems must survive.
Specifications
- Frequency Range (-10 dB): 60 Hz - 16 kHz
- Frequency Response (±3 dB): 70 Hz - 12 kHz
- Sensitivity (1w/1m): 99 dB SPL
- Nominal Impedance: 8 ohms
- Power Capacity: 250 watts
- Peak Power Capacity: 1000 watts
- Recommended Amplifier Power: 250 watts to 500 watts into 8 ohms
- Maximum SPL: 129 dB
- Nominal Dispersion: 90° x 50°
- Crossover Frequency: 1.8 kHz
- Dimensions (H x W x D): 572 mm x 394 mm x 318 mm (22.5 in x 15.5 in x 12.5 in)
- Weight: 19.5 kg (43 lbs)
- High Frequency Driver: JBL 2412 1" exit compression driver mounted on Progressive Transition™Waveguide
- Low Frequency Driver: JBL M112-8
- Input Connectors: Neutrik® Speakon® NL-4 (x1); ¼" TS phone jack (x1); parallel
