Marshall GV2
Marshall GV2 Introduction:
Launched in the 1980's, the original Guv'nor became a classic footpedal known for high quality distortion tones. Much loved by pros, semi-pros and amateurs alike, the Guv'nor earned itself a special place in the hearts of distortion smitten guitarists the world over.
The new Guv'nor Plus is an updated version of the original Guv'nor. Within the sturdy metal housing lies the tone, feel and sound of the original Guv'nor, but with extra features specially designed to add extra power and flexibility to cope with the exacting requirements of today's musicians.
The tonal versatility of the Guv'nor Plus is such that it is like adding another Marshall amp to your existing set-up.
The expanded Gain structure allows you to steer your guitar tone through many different styles.
From natural sounding vintage valve amp break-up, ideal for singing blues, to chunky JCM 800 classic rock tones, right through to modern day super-saturation, for liquid sustain and grinding chords.
In addition you will also find a Deep control which adds a resonant bass boost, giving you similar feel and response to the resonant thump of a Marshall 4 x 12 cabinet.
The Guv'nor Plus features a passive bypass for the main signal path to ensure complete tonal integrity and has a quality of tone matched only by its versatility.
This booklet provides a complete run down of the Guv'nor Plus's features for your information. We have also included a number of suggested settings to help guide you.
It should be remembered that these are only a starting point and you should really experiment.When you take the time to explore the many different overdrive and distortion characters of the Guv'nor Plus, you won't be disappointed.
Marshall GV2 Features:
Out Jack
- This is the output of the Guv'nor Plus and is for connection to the amplifier or to another effects pedal.
Gain
- This increases the amount of distortion, taking you from vintage breakup, ideal for big crunchy chords and sweet singing blues, to full on grind with super saturation.
- The Guv'nor Plus features the classic Marshall 3 way tone network to guarantee true Marshall tone at all times and to allow you to add unique Marshall character to any rig.
Bass
- Adjusts the bass frequencies in your tone. Increasing the Always use good quality shielded leads.
- Always use 9V regulated DC supply with centre negative.
- Although it may seem obvious the first action in achieving a good effected sound (be it duration / compression etc.) is to find the perfect bypassed sound.
- This will then allow the correct level to be set with the effect unit to allow a cut or boost in volume and a realistic tone.
- On clean channels it is advisable to set the gain (or volume) to a setting of no less than one quarter maximum so as not to get unrealistic results due to any volume dependent tonal shaping on the amplifier preamp.
- amount of bass will generally make your tone warmer and thicker at the bottom end.
Deep
- This adds an active resonant bass boost to your tone in a way that can't be replicated with traditional tone controls and has a similar effect to the acclaimed JCM2000 "Deep" switch.
- Increasing the amount of Deep will add masses of tight bottom end to your tone giving it real low end resonance and incredible fullness.
DC Input
- For input of a 9V DC negative regulated power supply should you not wish to use batteries.
LED
- Indicates when the Guv'nor Plus is in operation.
Treble
- Adjusts the high end frequencies in your tone, an increase making it brighter, sharper and more cutting.
Midv
- Adjusts the middle frequencies in your tone. Adding more middle will fill out your sound and make it fatter. By reducing the amount of middle in your tone you will make it thinner and sharper.
- Cranking the gain (item 2) up and setting the Mid control to minimum will deliver "scooped" sounds, ideal for brutal crunch tones.
Volume
- Adjusts the volume of the Guv'nor Plus. This allows you to cut or boost your volume when you switch the pedal on and is ideal for switching from rhythmn to higher volume solo levels.
- The Volume levels of the Guv'nor Plus are greater than previously available on the original Guv'nor to allow you to push the front end of your amp harder for even more overdrive.
In Jack
- This is the input jack, for connection directly from your guitar or to another effects pedal if you are linking pedals together.
Foot Switch
- For switching the Guv'nor Plus on and off.
Battery Replacement
- To replace the battery, open the easily accessed coin screw battery cover plate by loosening screw as shown, then disconnect the battery connector lead.
- Use PP3 or equivalent battery (for improved battery life use alkaline type) Always ensure that the battery is removed when the pedal is not in use for long periods.
- Dispose of old battery in a safe place.
Marshall GV2 Specification:
- Power: 9V DC Centre Negative Regulated
- Current Draw: 9mA
- Controls: Pedal Switch, Gain, Bass, Treble, Volume, Deep & Mid.
- Switches: On/Off Switch
- Indicators: On/Off LED
- Jacks: Input/Output 'Jacksockets'
- Input Impedance: 1M 1/2
- Output Load Impedance: max 1k 1/2
- Dimensions: 120mm x 65mm x 55mm
- Weight: 510 grammes
Get your Marshall GV2 today!
