Marshall TSL 601
Marshall TSL 601 Description:
Marshall TSL 601 Combo Compact, powerful, and loaded with great tone.
Using similar technology to its 100W big brother the TSL100, the TSL601 offers as much flexibility as its illustrious brethren. The TSL601 uses 2 EL34 power valves for that classic pure Marshall valve tone which has become the cornerstone of rock music making. The TSL is crisp on clean, biting for blues, and monstrous for metal
Those familiar with the traditional Marshall clean tone will be shocked by how clean the TSL will actually get. Its new custom-voiced speaker was designed by the Marshall R&D department in conjunction with Celestion specifically for this combo.
Marshall TSL 601 Features:
- 3 independent channels each with volume and gain controls
- Independent EQ on the Clean channel
- Shared EQ on the Crunch/Lead channels
- 60W Svetlana EL34 power section
- Individual reverb levels for Clean and Overdrive channels - on/off footswitchable.
- Footswitchable Accutronics spring reverb with dual controls (one for Clean, one for Crunch/Lead)
- Footswitchable parallel effects loop with level selection and front panel Mix control
- Speaker emulation for direct recording, connection to an external amp or to a PA system
- XLR DI output
- Deep switch adding low-end resonance
- Tone Shift facility on the Crunch/Lead channel for instant tonal reshaping
- Ruggedly built, 5-way LED footcontroller
- New Celestion Wolverine 12" speaker
- 22.4"W x 18.9"H x 10.8"D
- 64.9 lbs."
Marshall TSL60 Front Panel Features:
- Input Jack
- Clean Gain
- Clean Treble, Mid, Bass
- Channel Switching
- Crunch Channel Gain
- Crunch Channel Volume
- Lead Channel Gain (OD2 - Red LED)
- Lead Channel Volume
- Overdrive Treble, Middle, Bass
- Overdrive Tone Shift
- Master FX Mix
- Clean Reverb
- Overdrive Reverb
- Master Presence Control
- Deep Switch
- Master Volume
- Standby Switch
- Power Switch
Marshall TSL601 Front Rear Panel Features:
- Footcontroller DIN Socket
- Loudspeaker Output Select
- Loudspeaker Output Jacks
- FX Loop Send Jack
- Loop Level Switch.
- FX Loop Return Jack
- Speaker Emulated D.I. Out XLR.
- H.T. Fuse - See specifications for correct value
- Mains Input
- Mains Fuse - See specifications for correct value
Marshall TSL601 Specifications:
Power Output 60 Watts RMS into 8 or 16 ohms
Valve complement 4 x ECC83/12AX7 and 2 x EL34
Loudspeaker Type TSL60 (None)(1x Marshall 'Wolverine' type WH-80-16,
TSL602 (2x Marshall 'Wolverine' type WH-80-8 connected in series for 16 ohm operation
Mains Requirement Preset for 117V~60Hz or 230V~50Hz
Other variations to special order see local distributor for information.
Mains Fuse T3AL - 120V or TI6AC - 230V
H.T. Fuse T500mAL
Buy Today & We'll Throw In The Following Free Gifts!
Free Deluxe 20FT Instrument Cable, Free Korg GA30 Tuner!
This is a limited time offer so please act quickly!
Get your Marshall TSL601 today!
