QSC Acoustic Design Loudspeakers AD-S52T (Black Version) (pairs)
The QSC AcousticDesign™ AD-S52T is a full-range, surface-mount loudspeaker with sleek, contemporary styling that fits perfectly into multiple environments and applications including hotels, restaurants, convention facilities, and multimedia environments. The loudspeaker's low frequency driver is magnetically shielded, making it perfect for use near video monitors.
The AD-S52 is a high output, 2-way design incorporating a 5.25" weatherproof, LF transducer and a 1" neodymium tweeter. This exceptional loudspeaker carries the added benefit of built-in dynamic power protection - thus ensuring system reliability in the event of overload conditions.
The AD-S52T models are equipped with a 70V/100V matching transformer for distributed audio systems. There is a transformer tap switch on the rear panel for setting the power level of the loudspeaker. This switch may also be set for 8 ohm operation, bypassing the transformer completely - providing greater system flexibility compared to most competing products.
The AD-S52 system package includes a ball mount assembly for convenient installation of the enclosure in a wide variety of orientations. If desired, the ball mount adapter's back plate can be removed, reducing the overall depth of the assembly and the footprint of the mount on the wall. Further, the assembly includes a weather-resistant input connection cover to protect the 5-way binding post input terminals.
5.25", 2-way design in a lightweight, contemporary styled multi-purpose enclosure
70V/100V Transformer Taps - for use with distributed audio systems
Available Optional Yoke Mount Bracket (sold separately)
Configuration: Compact two-way ported enclosure
Low Frequency Transducer: 5.25" shielded, weather-resistant
High Frequency Transducer: 1" neodymium tweeter
Frequency Range (measured free field response):
Frequency Response(+/-3 dB): 75 Hz - 19kHz
Useable Frquency Range (-10 dB): 60 Hz-20kHz
Continuous: 104 dB SPL
Peak: 110 dB SPL
Calculated using specified poewr capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.
Nominal Impedance: Switchable 8 ohms
Power Rating (continuous IEC specified test signal): 60 W (IEC, 100 hours)
Recommended Max. Amp Power: 120 W RMS
Sensitivity (based on nominal impedance): 86 dB, 2.83 V, 1 m, free field (4pi)
Transformer type: custom low distortion laminated core, wide bandwidth design
Transformer taps: 70V: 30, 15, 7.5, 3.75 Watts
100V: 30, 15, 7.5 Watts
Enclosure material: Injection molded, weather-resistant high-impact polystyrene
Enclosure finish: White (paintable)
Grille: Heavy-duty powder-coated aluminum
Connectors: Pair of 5-Way binding posts
Mounting Hardware: included ball mount assembly, optional yoke mount (sold separately)
Net Weight: 18 lbs. (8.2. kg)
Shipping Weight: 25 lbs. (11.4 kg)
Get Your QSC Acoustic Design Loudspeakers AD-S52T (Black Version) (pairs) Today!