QSC CSM12 Concert Stage Monitors
QSC's CSM-12 stage monitor offers the highest output-to-size ratio of any premium brand monitor on the market to date. Combining elegant industrial design with "state of the art" driver & waveguide technology, these low profile wedges possess the desired attributes asked for by many of today's monitor engineers.
The CSM-12 utilizes a selectable pattern control "shutter" system that enables the user to limit the amount of sonic energy spilling over into the audience, while increasing its upstage coverage angle. By opening the shutter, the vertical coverage is converted to an asymmetrical pattern of +45° and -75° off axis, while maintaining a nominal 50° pattern in the horizontal.
In addition to the generous upstage coverage of the CSM waveguide, special integral hardware provides up to an additional 15° (in 1° increments) of angle to the enclosure to gain a more extreme upstage coverage.
The CSM-12 utilizes a unique recessed connector pocket mounted on the bottom side of the enclosure, that with the use of its four corner rubber feet, enables the user to dress the cables in any direction needed while fully protecting the cable end connectors from damage or sight issues.
Features:
2-way low-profile stage monitors
High output and high power handling capacity
4" voice coil woofer
3" diaphragm, 1.4" exit neodymium compression driver
Intrinsic Correction™ digital tunings viaQSControl.net™
Active or passive operation (bi-amp or mono full-range)
Selectable coverage pattern: 150° H by 50° V inmulti-purpose mode or 50° H by 100° V (+45°, -75°) in wedge mode
Integral angle adjustment hardware
Multi-purpose capability via optional yoke/pole mounthardware
Protected and hidden connector panel on bottom of wedge
Heavy-duty grille, that can withstand up to 250 lbs. of weight
Specifications:
Configuration: 2-way wedge
Low-Frequency Transducer: 12" woofer, 4" voice coil
High-Frequency Transducer: 3" diaphragm/1.4" exit
Frequency Resposne (+/-3dB): 65Hz - 20kHz
Frequency Range: (-10 dB): 55Hz - 20kHz
Nominal Coverage (-6 dB):
Wedge: 50° H x +45°/-75° V
Multipurpose: 150° H x 50° V
Power Handling (Continuous):
Passive: 500W
Low-frequency:500W
High-frequency: 110W
Sensitivity (SPL 1 W at 1 m):
Passive: 97.5 dB
Low-frequency: 98.5dB
High-frequency: 108 dB
Maximum Calculated Output (SPL at 1 m):
Passive: 130.5dB
Low-frequency: 131.5 dB
High-frequency: 134.9 dB
Cabinet Type: Ported wedge
Enclosure: 15 mm Birch plywood
Grille: Heavy-duty, powder-coated steel
Optional Attachment: Yoke/pole mount
Dimensions: 11.87" H x 19.7" W x 24" D (301.5x 500 x 610.6 mm)
Get Your QSC CSM12 Concert Stage Monitors Today!
