The compact PLX1104 brings the same performance and technology as the rest of the PLX2 Series, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), this model offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg), the "plug-and-play" PLX1104 is perfect for ultra-portable rigs, as well as reference-quality playback.
| SPECIFICATIONS |
PLX1104 |
Stereo Mode
8 ohms (each channel)
FTC 20 Hz - 20 kHz 0.05% THD
EIA 1 kHz 0.1% THD |
310 W
325 W |
Stereo Mode
4 ohms (each channel)
FTC 20 Hz - 20 kHz 0.05% THD
EIA 1 kHz 0.1% THD |
500 W
550 W |
| Signal to Noise (20 Hz - 20 kHz) |
-106 dB |
| Input Sensitivity @ 8 ohms |
1.18 Vrms |
| Gain @ 8 ohms |
32.5 dB |
| Output Circuitry |
AB |
| Distortion (SMPTE-IM) |
Less than 0.02% |
Typical Distortion
1/8 rated power, 20 Hz-20 kHz
Full rated power, 20 Hz-20 kHz |
Less than 0.02%
Less than 0.02% |
| Frequency Response |
20 Hz-20 kHz, -0.5 dB |
| Damping Factor |
Greater than 200 |
| Input Impedance |
20k ohms balanced
10k ohms unbalanced |
| Input Clipping |
5.5 Vrms (+15 dBu) |
| Cooling |
Variable-speed fan, rear-to-front air flow |
| Input Connectors, each channel |
3-pin XLR and 1/4" TRS balanced |
| Output Connectors, each channel |
Neutrik® NL4 Speakon®
(Both channels available on Ch 1 output) |
| Rear Panel Switches |
Circuit Breaker |
| Front Panel Controls |
Detented Input Attenuator: 0 to ∞ dB
Power On/Off |
| Front Panel Indicators |
Clip: Red LED
-10: Green LED
Signal (-35 dB): Green LED
Power: Blue LED |
| PROTECTION
|
| Amplifier Protection |
Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection
Stable into reactive or mismatched loads |
| Load Protection |
On/off muting, DC-fault power supply shutdown |
| Infrasonic |
-3 dB, 8 Hz |
| DC fault |
Power supply shutdown |
| Ultrasonic |
-3 dB, 120 kHz |
| Short Circuit |
Muting |
| Thermal |
Limiting at 85° C, Muting at 90° C |
| Over Current |
Active clip limiting
AC circuit breaker |
| High Line |
Standard +15%, survive +25% |
| Low Line |
-40% |
| PHYSICAL |
Dimensions
Height
Width
Depth, Rack mounting surface to rear panel
Overall Depth |
3.5" (8.9 cm) 2 rack spaces
19" (48.3 cm)
8.95" (22.7 cm)
11" (27.9 cm)
|
| Weight |
13 lbs. (5.9 kg) net
18 lbs. (8.2 kg) shipping |
| Agency Approvals |
CCC, CB, CE, FCC, KETI, cUL, UL |
* CE versions may have up to 12% (0.5 dBw) less power due to special construction to meet EN-61000 AC harmonic limits
