Randall RM100BP
RM100BP Black Palomino
Our flagship sets the standard and will forever revolutionize how future tube heads are designed.
The RM100BP is both traditional & modern technology rolled into one amplifier.
First you have 3 independent modular channels that can be loaded with your choice and combination of the available tube preamp modules.
Load each channel with a preamp tone that fits only your needs with the ability to expand your arsenal anytime a new tone is needed. Don't purchase an amplifier because you like just the clean or hi-gain tone.
Build this amp with your clean, your rhythm, and your hi-gain tone for a complete custom set-up. With more than a dozen tube preamps always available, chances are you'll have a hard time picking just three.
CHANGE AND BIAS YOUR OWN POWER TUBES!
Enjoy the ease of replacing your power tubes anytime you like with the very user friendly power tube bias section found on each MTS amplifier.
If a tube fails, no problem, the amp will kick that tube out of the circuit and a small LED will light by the tube that fails.
Simply replace the small protection fuse and tube using a small voltage meter and screwdriver to adjust each individual bias point.
If you like experimenting with different tube types, the bias section allows you to pop-in and bias a new set of tubes in just a few minutes.
MIDI CHANNEL SWITCHING CAPABILITY!
Connect your RM100BP to any MIDI capable effects processor and program individual effects to each channel.
With the MIDI in/thru jacks simply select your channel and external effect using the included RF3 MIDI footswitch, press and hold the channel switch button on the head for 2 seconds and hit the store button of the effects processor to save the preset.
The included footswitch will then select both the RM100 channel and effect you want at the same time.
Each MTS series amplifier including the RM100 head can be ordered in 3 custom cosmetic options.
Order any model in full Black, Black Palomino with black vinyl and palomino cloth front or full Palomino with palomino vinyl and grill cloth.
Each option provides a specific look to compliment any type of MTS tone and player.
Features:
3 Modules
100 Watts
6L6 Power tubes
MIDI in/thru
Master Volume, Presence, Density controls
Parallel loop w/front panel mix control
Series loop
Rear tube bias section
Slave out
3-button MIDI footswitch included
World voltage AC input selector (100/120/220/240)
29"W x 12"H x 11"D
35 lbs.
Get Your Randall RM100BP Today!
